Skip to main content

Market Heatmap for F&O Stocks and Indices

The market heatmap in Stolo turns the entire F&O market into one colour-coded screen. Every index and every stock with listed futures and options is a tile, shaded green when it is up on the day and red when it is down, with the depth of colour showing how big the move is. Instead of reading a 180-row table, you glance once and know which way the market is leaning and which sectors are doing the work.

The problem it solves​

On a normal trading day you want three things fast: is the market broadly up or down, which sectors are leading, and are there any outliers moving hard against the crowd. A table of percentage changes makes you scroll and sort to answer any of that. The heatmap answers all three at once. A wall of green with two red patches tells you the trend and the exceptions in the time it takes to look at it.

How to read a heatmap​

  1. Start with the colour balance. Mostly green means a risk-on day, mostly red means risk-off, a checkerboard means no clear theme and you should trade lighter.
  2. Scan the sector blocks. In the default Sector-wise view each sector is its own group with an up and down count in the heading. Banks deep green while IT is red is sector rotation you can trade around.
  3. Find the extremes. The brightest green and brightest red tiles are the day's biggest movers. The summary bar names the single best and worst performer for you.
  4. Check breadth against the index. If NIFTY is up half a percent but only 70 of 180 stocks are green, the index move is narrow and driven by heavyweights, which is a weaker signal than a move where 140 names are green.

Key terms explained​

TermWhat it means
TileOne instrument on the grid. Shows the symbol, last price and percentage change.
Colour scaleMaps percentage change to colour, roughly minus three percent (bright red) through zero to plus three percent (bright green).
Sector-wise viewThe default. Tiles grouped under sector headings, each heading showing that sector's advancing and declining count.
All viewEvery tile in one block, sorted from the largest gainer to the largest loser, no sector headings.
Summary barThe strip above the grid: total up count, total down count, and the best and worst performer by percentage.
Advances and declinesThe count of instruments up versus down. A market breadth measure.
Best and worstThe single highest and lowest percentage change on the board right now.

What the heatmap shows​

  • Indices row. NIFTY, BANKNIFTY, FINNIFTY, MIDCPNIFTY and the other tracked indices, sized larger and pinned above the stocks.
  • Sector groups. Every F&O stock under its sector: Banking, IT, Auto, Pharma, FMCG, Metals, Energy and the rest.
  • Per tile. Symbol, last traded price in rupees, and the day's percentage change with a sign.
  • Per sector heading. How many stocks in that sector are advancing versus declining.
  • Toolbar. A search box that filters by symbol or sector name, and a Sector-wise or All toggle.

A worked example​

Say the summary bar reads 138 up and 44 declining, best RELIANCE at plus 3.1 percent, worst HDFCBANK at minus 1.4 percent. The Banking block is mixed: ICICIBANK and AXISBANK green, HDFCBANK and KOTAKBANK red. The Energy block is almost entirely bright green, led by RELIANCE and ONGC.

The read: breadth is strongly positive, so this is a broad up day, but the leadership is Energy and select private banks, not the whole banking pack. A trader looking for an intraday long would lean toward an Energy name or the NIFTY itself rather than fighting the split in banks. Clicking the RELIANCE tile opens its Overview page to check whether the move has option and futures open interest behind it before acting.

How to use it in Stolo​

Stolo market heatmap in Sector-wise view with the advances and declines summary bar
  1. Log in to Stolo and open Analysis from the main menu, then Market Heatmap under the Market Sentiment section.
  2. Read the summary bar first for the up and down count and the day's best and worst performer.
  3. Stay in Sector-wise view to see which groups are leading, or switch to All to jump straight to the biggest movers.
  4. Use the search box to isolate a symbol or a whole sector.
  5. Click any tile to open that instrument's Overview page for the full analysis.
  6. Use the header refresh control whenever you want an immediate update.
tip

Check the heatmap once at the open, once mid-morning and once in the last hour. Three reads a day is usually enough to catch a change in market tone without staring at it.

How traders use it​

  • Open-of-day read. One look at the colour balance and the breadth count sets your bias for the session before you place anything.
  • Sector rotation. Compare sector blocks day to day. Money moving from FMCG into Metals shows up as a block flipping from red to green.
  • Outlier hunting. In All view the top and bottom rows are your gap-up and gap-down candidates for a momentum or fade trade.
  • Breadth confirmation. Before trusting an index breakout, check that a healthy majority of stocks are moving with it on the heatmap.

Live mode and end of day​

During market hours the tiles update on a periodic refresh, so the board always reflects the last few minutes of trade. After the close it freezes on the final day change, which makes it a clean end-of-day recap of sector leadership. There is no historical date picker on the heatmap itself; for replaying a past session use Market Replay.

Frequently asked questions​

What is a market heatmap?
A market heatmap is a grid of tiles, one per instrument, where each tile is coloured by how much that instrument has moved on the day. Green shades mean the stock or index is up, red shades mean it is down, and the deeper the colour the larger the move. It lets you read the state of a few hundred names in a single glance instead of scrolling a table.
Which instruments does the Stolo heatmap cover?
The heatmap covers the F&O universe: the major indices such as NIFTY, BANKNIFTY, FINNIFTY and MIDCPNIFTY at the top, then every stock that has futures and options listed, grouped under its sector. It is the same universe the Market Screener and Advances and Declines views use.
What do the colours on the heatmap mean?
The colour maps to the percentage change on the day. A tile that is slightly up is a muted green, a strong gainer of two to three percent or more is a bright green, and the red side mirrors that for losers. The legend along the top shows the scale, which runs from about minus three percent through zero to plus three percent.
What is the difference between Sector-wise and All view?
Sector-wise is the default. It groups stocks under their sector heading, so you can see at a glance whether banks are green while IT is red. All view drops the sector headings and lays every stock out in one block sorted from the biggest gainer to the biggest loser, which is faster when you only care about the extremes.
How do I find one stock on the heatmap?
Use the search box in the toolbar. Type a symbol such as RELIANCE to isolate that tile, or type a sector name such as banking to narrow the grid to that sector. Clear the search to return to the full view. The result count next to the box tells you how many tiles match.
What does the advances and declines count at the top show?
The summary bar shows how many instruments are up versus down right now, plus the single best and worst performer by percentage. Each sector heading also carries its own up and down count. This is a quick breadth read: a day where 140 names are green and 40 are red is a broad rally, while 90 up and 90 down is a stock-pickers market.
Can I click a tile to see more?
Yes. Clicking any tile opens that instrument's Overview page in Stolo, where you get the day chart, the option chain summary, open interest and the rest of the analysis widgets for that name. The heatmap is the starting point and the Overview page is where you dig in.
How often does the heatmap refresh?
It refreshes automatically every few minutes during market hours, and there is a manual refresh control in the header if you want the latest read immediately. It is built for a periodic scan of the whole market rather than tick-by-tick watching of one name.
Does the heatmap work after market hours?
After the close the heatmap holds the final change for the day, so it doubles as an end-of-day summary of which sectors led and which lagged. Live movement resumes at the next session open.
How is the heatmap different from the Sectors Analysis view?
The Sectors Analysis view is about the sector indices themselves and their internal breadth. The heatmap is at the individual stock level: it shows you every constituent tile so you can see whether a green sector is green because of one heavyweight or because the whole group is moving. Use them together.
What plan do I need for the market heatmap?
The market heatmap is part of Stolo's paid analysis access and can be tried on the Flexi Trial, which starts at ₹199. See the subscription plans page for current pricing.

See the whole market in one screen

Open Stolo's market heatmap for a colour-coded read of every F&O stock and index, grouped by sector.

Start with a Flexi Trial from ₹199